Toyota Prius Gen III (W3) service kit to OEM specifications includes engine oil, an oil filter, and an air filter. This kit meets uncompromising manufacturer standards, with 4.2 L of 0W-20 viscosity oil—the number one choice recommended in the owner's manual.
Anticor Schwarz is a high-grade aerosol anti-corrosion and anti-gravel coating formulated with synthetic resins and rubbers. It is designed for treating external and internal surfaces of vehicle bodies, underbodies, wheel arches, fenders, aprons, and sills. Essential for professional body repairs, it protects interior welds, new replacement panels, doors, hoods, and trunks prior to final assembly.
Product Features & Benefits
An advanced rubberized underbody shield offering long-lasting protection against stone impacts, road salt, structural corrosion, and cabin noise.
- Superior corrosion protection: Shields against road salts, chemical de-icing agents, and weather extremes while passivating and slowing active rust formation.
- Impact resistant & self-healing film: Forms a tough, flexible, non-chipping rubber film with thixotropic self-leveling properties that self-seals minor scratches.
- Crevice penetration & moisture displacement: Penetrates micro-fissures and panel joints to actively displace trapped water and form a waterproof barrier.
- Strong adhesion & thermal tolerance: Binds strongly to smooth metallic surfaces without flaking under high thermal conditions or cracking in sub-zero cold.
- Acoustic dampening: Reduces road noise, gravel chatter, and body resonance, enhancing overall ride comfort.
Directions for Use
- Thoroughly clean target surfaces to remove rust, road grime, oil, and dust, then degrease using 9691 MANNOL Brake Cleaner.
- Shake the aerosol can vigorously until the internal mixing ball moves freely, then continue shaking for an additional minute.
- Hold the can upright and spray a crosswise layer up to 1.5 mm thick from a distance of 20–30 cm.
- For optimal anti-gravel protection, apply a second or third coat after letting the previous layer flash off for 1–2 minutes.
- Invert the aerosol can after use and spray until only propellant gas emerges to thoroughly clear the spray valve.
- The vehicle is ready for light drive-away in approximately 2 hours, with full curing taking 12–24 hours (not suitable for overpainting).