Fix-Gewinde Mittelfest 9924/9925 is a medium-strength threadlocker designed to secure bolts, nuts, and studs against vibration and heavy loads while allowing future disassembly. It effectively prevents self-loosening and seals connections against leaks and corrosion.
Windshield Sealant is a high-performance, one-component polyurethane adhesive-sealant engineered for bonding front, rear, and side windows in passenger cars, commercial vans, railway stock, and specialized vehicles. Formulated to meet the specification of Loctite TEROSON PU 8597 HMLC, it provides immediate structural integrity and meets stringent European crash test standards.
-
€8.39
Reference:
9910
Love0
Add to compare0
Add to wishlist
Product Features & Benefits
A professional-grade polyurethane direct glazing sealant offering high green strength, rapid cure speed, and superior UV durability.
- Rapid drive-away time: Ready for drive-away in 1 hour according to US FMVSS standards and 4 hours under the most rigorous European crash test protocols.
- High initial green strength: Exceptional positioning hold eliminates the need for additional mechanical glass supports during setting.
- Outstanding physical properties: Features high shear modulus, low electrical conductivity, excellent slump resistance, and long-term elasticity under dynamic loads.
- Universal adhesion & UV barrier: Binds strongly to raw glass, ceramic-coated glass, painted body apertures, and old polyurethane beads, with high resistance to UV degradation.
Directions for Use
- Thoroughly clean the body aperture and glass of old adhesive, rust, dust, and grease, then degrease using 9691 MANNOL Brake Cleaner and allow to dry.
- Abrade the bonding line of the glass lightly with a fine abrasive pad, clean with 9974 MANNOL Glas Cleaner (dry for 2 minutes), and perform a final degreasing pass.
- Preheat the sealant cartridge to 50–80 °C for approximately 15 minutes before application.
- Apply a continuous, unbroken bead of adhesive along the glass perimeter (or body flange) starting from the bottom edge.
- Fit the glass into the aperture and press lightly into position (re-positioning is possible for up to 15 minutes; secure with tape if necessary).
- Allow the vehicle to rest on a level surface while the adhesive cures (full curing occurs within 24 hours; driving is possible after 1 hour).