Epoxy-Metal is a high-performance two-component adhesive based on epoxy resin designed for the rapid and reliable bonding of all metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, etc.) in any combination. Featuring exceptional durability and a high mechanical shear strength, it is ideal for quick repairs such as sealing cracks and cavities, restoring internal and external threads, and acting as a filler putty for flat metal surfaces.
Epoxidkitt is a two-component epoxy putty stick engineered for quick and permanent repairs. It effectively fills holes, scratches, cracks, cavities, and dents across all metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead) as well as plastics. Ideal for sealing leaks in fuel tanks, radiators, oil pans, barrels, and fluid pipes. It can be applied underwater and retains structural integrity at temperatures up to +260 °C.
Product Features & Benefits
A hand-kneadable, steel-reinforced epoxy compound providing high mechanical strength, rapid underwater curing, and complete post-cure machinability.
- High thermal & chemical endurance: Maintains mechanical integrity up to +260 °C while offering excellent resistance to aggressive chemicals and fluid pressure.
- Rapid curing cycle: Hardening starts within 15 minutes, reaching full solidification in just 1 hour under all conditions, including complete water immersion.
- Fully machinable finish: Once cured, the compound can be drilled, tapped, sawn, filed, sanded, painted, or varnished.
- Dielectric & asbestos-free: Safe, non-asbestos formula that acts as an effective electrical insulator.
- Broad material compatibility: Adheres firmly to metal alloys, plastics, glass, ceramics, concrete, and wood—even on oily or submerged surfaces.
Directions for Use
- Clean the target surface of old paint, coatings, dirt, and grease, and lightly sand it to improve mechanical adhesion.
- Degrease thoroughly using 9691 MANNOL Brake Cleaner and allow the area to dry completely.
- Cut off the required amount of putty stick and knead it thoroughly by hand until a uniform, warm mass is formed.
- Apply the compound to the repair area, press firmly into place, and smooth off excess with a spatula (hold firmly if applying underwater or on oily surfaces).
- Curing initiates within 15 minutes, with complete structural cure reached within 1 hour.
- Store unused putty tightly sealed in its original container in dry, cool conditions.